866-633-6883
Talk to a Lighting Expert Now

15 AMP 3 Way Toggle Switch

Model: 13-TS315

15 AMP 3 Way Toggle Switch

 

Three-way switches are always used in pairs and allow you to control a light or receptacle from two different locations. These switches have no ON or OFF markings because the on and off positions will vary as the switches are used.

The three-way switch has three terminal screws. The hot wire from the power source connects to the darkest screw terminal marked "COM" for "common." The other two terminals are called "travelers" and are interchangeable. The switch also has a ground terminal.

The trick in replacing an old three-way switch is to mark the wire attached to the COM terminal before you remove the old switch. Since the other two are interchangeable, you can't get them wrong. If there is a white wire connected to a traveler terminal, it should be labeled with black tape to indicate it is hot. 

 

 

ELECTRICAL SPECIFICATIONS Input • Input Voltages: Universal120 or 277VAC, 60Hz (User selectable with (2) wire jumpers provided) • Input Frequencies: 60Hz ±2% • Input Protection: Provided by Service Panel rated at 20 amps maximum Output • Output Voltages: 120 or 277VAC (60Hz) • Efficiency Rating: 98% at full rated load (line) • Waveform: Sinusoidal (digitally controlled) • Static Voltage: ±5% during battery discharge. 0-100% linear load. • Output Frequencies: 60Hz. ±0.3Hz during emergency cycle • Output Distortion: Less than 3% THD (linear load) • Transfer Time: Less than 1.0 second. • Load Power Factor Range: 0.88 Lead to 0.88 Lag. • Minimum Loading: 0% of rated system capacity. • Output Protection: Circuit breaker. HOUSING Heavy duty steel cabinet is finished in white based-on powder providing scratch and corrosion resistance. MOUTING Designed for mounting to walls by means of keyhole slots provided in the back of the unit housing. BATTERY Battery: Sealed Lead Calcium (10 year life) Battery Voltage: 72VDC for 03-LPS-1150, Runtime: 90-minutes standard- based on battery performance at (25°C). Other runtimes available, consult factory. Battery Protection: Low Voltage Battery Disconnect protects the battery from being severely damaged by deep discharge during prolonged power failures. Reverse Polarity, DC Overload and Short Circuit Protection provided by a DC input breaker and fuse. CHARGER Charger Type: Fully automatic, temperature compensated, dual-mode charger Power Consumption: (charger only) 73W maximum (6.7W in standby) for 03-LPS-1150 model. Recharge Duty Cycle: Meets UL924 requirements Controls: Momentary test switch, AC-ON, Charge-ON and Inverter-ON LED indicator lights Safety Circuitry: AC Lockout prevents battery discharge prior to initial unit power-up. Brownout Protection automatically switches the unit to emergency mode when utility voltage is significantly reduced.
CUSTOMER REVIEWS
Ask a Question

User Reviews

0.0 out of 5
★★★★★
0
★★★★★
0
★★★★★
0
★★★★★
0
★★★★★
0

There are no reviews yet.

Be the first to review “15 AMP 3 Way Toggle Switch”

Your email address will not be published. Required fields are marked *

WordPress Lightbox