OUTDOOR LIGHTING

INDOOR LIGHTING

LED High Bay Lights

High Lumen High Bay

LED Full Body High Bays

LED Linear & Linear Adjustable High Bays

LED Round High Bays

Office Lighting

LED Back-Lit Flat Panels

LED Center Baskets

Panel Mounting Kits

LED Stairwell Lights

LED Strip Lights

LED Recessed Cans & Trims

2 Inch LED Recessed Cans & Trims

3 Inch LED Recessed Cans & Trims

4 Inch LED Recessed Cans & Trims

5/6 Inch LED Cans & Trims

5/6 Inch Sloped Recessed Cans & Trims

6 Inch Sloped Cans and Trims

5/6 Inch LED Recessed Cans & Trims

Architectural LED Cans & Trims

LED Flat Round Panels

LED Ceiling Surface & Recessed Mount

LED Decorative Lights

LED Round Ceiling Luminaires

LED Square Ceiling Luminaires

LED Tubes

T5 – T8 LED Retrofit Tubes

LED T8 Dual-Ended Bypass Tubes

LED Wrap Around Ceiling Lights

LED Economy Wrap Around

LED Vapor Tight Lights

LED Under Cabinets

Sloped Recessed Cans & Trims

LIFE SAFETY

WIRING DEVICES & SUPPLIES

My Account

News

866-633-6883

Talk to a Lighting Expert Now

866-633-6883

15 AMP 4 Way Decora Switch

Rated 0 out of 5

Model: 13-DS415

15 AMP 4 WAY DECORA SWITCH

The four-way switch is used in between two three-way switches to provide control for an outlet or light fixture from three or more different locations. If you want to have control from more than three locations—say five locations—you would still use two three-way switches (one on each end) and three four-way switches in between the two three-ways.

The four-way switch looks similar to a double-pole switch, except it has no ON or OFF markings. It has four terminals (plus a ground), usually brass-colored. There is no COM or “common” terminal, as in a three-way switch. The four-way switch simply functions as a switching device for the traveler wires between the three-way switches.

ELECTRICAL SPECIFICATIONS Input • Input Voltages: Universal120 or 277VAC, 60Hz (User selectable with (2) wire jumpers provided) • Input Frequencies: 60Hz ±2% • Input Protection: Provided by Service Panel rated at 20 amps maximum Output • Output Voltages: 120 or 277VAC (60Hz) • Efficiency Rating: 98% at full rated load (line) • Waveform: Sinusoidal (digitally controlled) • Static Voltage: ±5% during battery discharge. 0-100% linear load. • Output Frequencies: 60Hz. ±0.3Hz during emergency cycle • Output Distortion: Less than 3% THD (linear load) • Transfer Time: Less than 1.0 second. • Load Power Factor Range: 0.88 Lead to 0.88 Lag. • Minimum Loading: 0% of rated system capacity. • Output Protection: Circuit breaker. HOUSING Heavy duty steel cabinet is finished in white based-on powder providing scratch and corrosion resistance. MOUTING Designed for mounting to walls by means of keyhole slots provided in the back of the unit housing. BATTERY Battery: Sealed Lead Calcium (10 year life) Battery Voltage: 72VDC for 03-LPS-1150, Runtime: 90-minutes standard- based on battery performance at (25°C). Other runtimes available, consult factory. Battery Protection: Low Voltage Battery Disconnect protects the battery from being severely damaged by deep discharge during prolonged power failures. Reverse Polarity, DC Overload and Short Circuit Protection provided by a DC input breaker and fuse. CHARGER Charger Type: Fully automatic, temperature compensated, dual-mode charger Power Consumption: (charger only) 73W maximum (6.7W in standby) for 03-LPS-1150 model. Recharge Duty Cycle: Meets UL924 requirements Controls: Momentary test switch, AC-ON, Charge-ON and Inverter-ON LED indicator lights Safety Circuitry: AC Lockout prevents battery discharge prior to initial unit power-up. Brownout Protection automatically switches the unit to emergency mode when utility voltage is significantly reduced.

CUSTOMER REVIEWS

Ask a Question

User Reviews

0.0 out of 5

★★★★★

There are no reviews yet.

Be the first to review “15 AMP 4 Way Decora Switch” Cancel reply

WordPress Lightbox