Your cart is currently empty!
.JPG)
.jpg)
.jpg)
Talk to a Lighting Expert Now
The 03-LPS-600 is designed to provide up to 600 watts of emergency power to incandescent, fluorescent, induction and/or LED fixtures. The 03-LPS-600
unit provides clean, sinusoidal AC output power allowing it to be remotely mounted up to 1,000 feet away from the controlled fixture(s).
Unlike a fluorescent ballast or LED emergency pack, the 03-LPS-600 provides power to the input side of the fixture, (including the ballast) eliminating any
chance of incompatibility. The 03-LPS-600 Series is designed for surface mounting. All 03-LPS systems will provide emergency power output for a
minimum of 90-minutes.
- Input Voltages: Universal120 or 277VAC, 60Hz (User selectable with (2) wire jumpers provided)
- Input Frequencies: 60Hz ±2%
- Input Protection: Provided by Service Panel rated at 20 amps maximum
- Output Voltages: 120 or 277VAC (60Hz)
- Efficiency Rating: 98% at full rated load (line)
- Waveform: Sinusoidal (digitally controlled)
- Static Voltage: ±5% during battery discharge. 0-100% linear load.
- Output Frequencies: 60Hz. ±0.3Hz during emergency cycle
- Output Distortion: Less than 3% THD (linear load)
- Transfer Time: Less than 1.0 second.
- Load Power Factor Range: 0.88 Lead to 0.88 Lag.
- Minimum Loading: 0% of rated system capacity.
- Output Protection: Circuit breaker.
- Heavy duty steel cabinet is finished in white based-on powder providing scratch and corrosion resistance.
- Designed for mounting to walls by means of keyhole slots provided in the back of the unit housing.
- Battery: Sealed Lead Calcium (10 year life)
- Battery Voltage: 96VDC for 03-LPS-600 model
- Runtime: 90-minutes standard- based on battery performance at (25°C).
- Other runtimes available, consult factory.
- Battery Protection: Low Voltage Battery Disconnect protects the battery frombeing severely damaged by deep discharge during prolonged power failures.
- Reverse Polarity, DC Overload and Short Circuit Protection provided by a DCinput breaker and fuse.
- Charger Type: Fully automatic, temperature compensated, dual-mode charger
- Power Consumption: (charger only)
- 56W maximum (5W in standby) for 03-LPS-600 mode
- Recharge Duty Cycle: Meets UL924 requirement
- Controls: Momentary test switch, AC-ON, Charge-ON and Inverter-ON LED indicator lights
- Safety Circuitry: AC Lockout prevents battery discharge prior to initial unit power-up
- Brownout Protection automatically switches the unit to emergency mode when utility voltage is significantly reduced.
CUSTOMER REVIEWS
User Reviews
0.0 out of 5
★★★★★
0
★★★★★
0
★★★★★
0
★★★★★
0
★★★★★
0
There are no reviews yet.