Talk to a Lighting Expert Now

2 Inch LED Square Adjustable Gimbal Retrofit Kit – 8W – 694 Lumens – Energy Star Rated – UL Listed – 3K/4K – 120V

Model: 11-LED-2T-GRW-SQ-3K

2″ LED SQUARE ADJUSTABLE GIMBAL RETROFIT KIT – 8W

2″ LED Square Adjustable Gimbal Retrofit kit. It is compatible with most 2” recessed standard housings. Ideal for both remodel or new construction applications. The retrofit kit comes with a disconnect screw-in base lead for easy installation into standard incandescent sockets.

  • White painted Diecast body is appropriate for heat dissipation.
  • Oversized trim ring constructed from one-piece diecast 
  • 3 Tension clips pre-installed on unit for easy installation
  • E26 medium screw-base Edison connector provides easy retrofit of incandescent housings.
  • 9W – 470 Lumens
  • Protected LED driver performs at 120V
  • Dimming down to 5% with most dimmers.
  • CCT 2700K, 3000K, 4000K, 5000K available
  • CRI >80 or >90
  • cULus classified
  • Energy star qualified
  • Title 24 compliant
  • Wet locations (Not suitable for coastal/salt water area)
  • Damp Locations
  • RoHS compliance 
  • Tested in accordance with IESNA LM79 & LM80
  • Dimensions – 3 1/8″ x 2 5/8″ 
ELECTRICAL SPECIFICATIONS Input • Input Voltages: Universal120 or 277VAC, 60Hz (User selectable with (2) wire jumpers provided) • Input Frequencies: 60Hz ±2% • Input Protection: Provided by Service Panel rated at 20 amps maximum Output • Output Voltages: 120 or 277VAC (60Hz) • Efficiency Rating: 98% at full rated load (line) • Waveform: Sinusoidal (digitally controlled) • Static Voltage: ±5% during battery discharge. 0-100% linear load. • Output Frequencies: 60Hz. ±0.3Hz during emergency cycle • Output Distortion: Less than 3% THD (linear load) • Transfer Time: Less than 1.0 second. • Load Power Factor Range: 0.88 Lead to 0.88 Lag. • Minimum Loading: 0% of rated system capacity. • Output Protection: Circuit breaker. HOUSING Heavy duty steel cabinet is finished in white based-on powder providing scratch and corrosion resistance. MOUTING Designed for mounting to walls by means of keyhole slots provided in the back of the unit housing. BATTERY Battery: Sealed Lead Calcium (10 year life) Battery Voltage: 72VDC for 03-LPS-1150, Runtime: 90-minutes standard- based on battery performance at (25°C). Other runtimes available, consult factory. Battery Protection: Low Voltage Battery Disconnect protects the battery from being severely damaged by deep discharge during prolonged power failures. Reverse Polarity, DC Overload and Short Circuit Protection provided by a DC input breaker and fuse. CHARGER Charger Type: Fully automatic, temperature compensated, dual-mode charger Power Consumption: (charger only) 73W maximum (6.7W in standby) for 03-LPS-1150 model. Recharge Duty Cycle: Meets UL924 requirements Controls: Momentary test switch, AC-ON, Charge-ON and Inverter-ON LED indicator lights Safety Circuitry: AC Lockout prevents battery discharge prior to initial unit power-up. Brownout Protection automatically switches the unit to emergency mode when utility voltage is significantly reduced.
CUSTOMER REVIEWS
Ask a Question

User Reviews

0.0 out of 5
0
0
0
0
0

There are no reviews yet.

Be the first to review “2 Inch LED Square Adjustable Gimbal Retrofit Kit – 8W – 694 Lumens – Energy Star Rated – UL Listed – 3K/4K – 120V”

Your email address will not be published. Required fields are marked *

WordPress Lightbox