OUTDOOR LIGHTING

INDOOR LIGHTING

LED High Bay Lights

High Lumen High Bay

LED Full Body High Bays

LED Linear & Linear Adjustable High Bays

LED Round High Bays

Office Lighting

LED Back-Lit Flat Panels

LED Center Baskets

Panel Mounting Kits

LED Stairwell Lights

LED Strip Lights

LED Recessed Cans & Trims

2 Inch LED Recessed Cans & Trims

3 Inch LED Recessed Cans & Trims

4 Inch LED Recessed Cans & Trims

5/6 Inch LED Cans & Trims

5/6 Inch Sloped Recessed Cans & Trims

6 Inch Sloped Cans and Trims

5/6 Inch LED Recessed Cans & Trims

Architectural LED Cans & Trims

LED Flat Round Panels

LED Ceiling Surface & Recessed Mount

LED Decorative Lights

LED Round Ceiling Luminaires

LED Square Ceiling Luminaires

LED Tubes

T5 – T8 LED Retrofit Tubes

LED T8 Dual-Ended Bypass Tubes

LED Wrap Around Ceiling Lights

LED Economy Wrap Around

LED Vapor Tight Lights

LED Under Cabinets

Sloped Recessed Cans & Trims

LIFE SAFETY

WIRING DEVICES & SUPPLIES

My Account

News

866-633-6883

Talk to a Lighting Expert Now

866-633-6883

3 Inch LED Square Baffle Retrofit Kit – 9W – 470 Lumens – Energy Star Rated – UL Listed – 3K – 120V

Rated 0 out of 5

Model: 11-3RKT-BWSQ-3K

View Spec Sheet

Kelvins

Clear

3″ LED SQUARE BAFFLE RETROFIT KIT – 9W

LED Square Baffle Retrofit kit. It is compatible with most 3” recessed standard housings. Ideal for both remodel or new construction applications. The retrofit kit comes with a disconnect screw-in base lead for easy installation into standard incandescent sockets.

White painted Diecast body is appropriate for heat dissipation.
Oversized trim ring constructed from one-piece diecast
3 Tension clips pre-installed on unit for easy installation
E26 medium screw-base Edison connector provides easy retrofit of incandescent housings.
9W – 470 Lumens
Protected LED driver performs at 120V
Dimming down to 5% with most dimmers.
CRI >80 or >90
cULus classified
Energy star qualified
Title 24 compliant
Wet locations (Not suitable for coastal/salt water area)
Damp Locations
RoHS compliances
Tested in accordance with IESNA LM79 & LM80
Dimensions – 4 3/8″ x 2 3/4″

ELECTRICAL SPECIFICATIONS Input • Input Voltages: Universal120 or 277VAC, 60Hz (User selectable with (2) wire jumpers provided) • Input Frequencies: 60Hz ±2% • Input Protection: Provided by Service Panel rated at 20 amps maximum Output • Output Voltages: 120 or 277VAC (60Hz) • Efficiency Rating: 98% at full rated load (line) • Waveform: Sinusoidal (digitally controlled) • Static Voltage: ±5% during battery discharge. 0-100% linear load. • Output Frequencies: 60Hz. ±0.3Hz during emergency cycle • Output Distortion: Less than 3% THD (linear load) • Transfer Time: Less than 1.0 second. • Load Power Factor Range: 0.88 Lead to 0.88 Lag. • Minimum Loading: 0% of rated system capacity. • Output Protection: Circuit breaker. HOUSING Heavy duty steel cabinet is finished in white based-on powder providing scratch and corrosion resistance. MOUTING Designed for mounting to walls by means of keyhole slots provided in the back of the unit housing. BATTERY Battery: Sealed Lead Calcium (10 year life) Battery Voltage: 72VDC for 03-LPS-1150, Runtime: 90-minutes standard- based on battery performance at (25°C). Other runtimes available, consult factory. Battery Protection: Low Voltage Battery Disconnect protects the battery from being severely damaged by deep discharge during prolonged power failures. Reverse Polarity, DC Overload and Short Circuit Protection provided by a DC input breaker and fuse. CHARGER Charger Type: Fully automatic, temperature compensated, dual-mode charger Power Consumption: (charger only) 73W maximum (6.7W in standby) for 03-LPS-1150 model. Recharge Duty Cycle: Meets UL924 requirements Controls: Momentary test switch, AC-ON, Charge-ON and Inverter-ON LED indicator lights Safety Circuitry: AC Lockout prevents battery discharge prior to initial unit power-up. Brownout Protection automatically switches the unit to emergency mode when utility voltage is significantly reduced.